Output Torque

When a Hydraulic Motor is being driven the Output Torque M(Nm) can be calculated by following these steps:

1) Pressure P (bar), typical pressures for hydraulic motors would be up to 250 bar.
2) Motor Efficiency, for hydraulic motors this is in the range 0.85-0.95.
3) Displacement Vg, sizes for hydraulic motors range from 5cm³ to 250cm³

Then press M to calculate, this will be shown in the result box.

If the required Output Torque is known but the motor has yet to be sized then the Displacement Vg(cm³) can be calculated:

1) Pressure P (bar), typical pressures for hydraulic motors would be up to 250 bar.
2) Motor Efficiency, for hydraulic motors this is in the range 0.85-0.95.
3) Output Torque M (Nm).

Then press Vg to calculate, this will be shown in the result box.

If the required Output Torque and Displacement are known but the system Pressure P(bar) has yet to be determined then it can be calculated:

1) Displacement Vg, sizes for hydraulic motors  from 5cm³to 250cm³
2) Motor Efficiency, for hydraulic motors this is in the range 0.85-0.95.
3) Output Torque M (Nm).

Then press Vg to calculate, this will be shown in the result box.

Useful conversions factors:

1kW = 1.34hp

1Nm = 0.737 lbf.ft = 141 oz.in

1bar = 14.5psi

1 cm³ = 0.061 cu.inch