Hydraulic systems often require directional control valves, pressure relief valves and pilot operated check valve when actuators or hydraulic motors are operated.
Directional Control Solenoid Valves
Hydraulic system components such as Cetop valves are used to form a hydraulic circuit. The advantage of this interchangeable range of valves is they are common throughout the world and can be added to and replaced from most valve manufacturers.
Hydraproducts offer the CETOP03/NG6 size, as well as a range of directional control valve manifolds.
Hydraulic systems consisting of:-
Solenoid Directional Control Valve, these have a four-landed control spool. Solenoid coils move the spool position in order to change the direction of hydraulic oil flow.
Pressure Relief Valve, these modular valves are sandwiched underneath the solenoid valves. These hydraulic pressure relief valve will open to limit the pressure in the control line.
Flow Control Valves, adjusted in order to control the flow through these valve modules. They can be configured to control flow either way, via the use of a sandwiched seal plate.
Pilot operated check valve, containing pressure in the service ports is a common requirement to prevent hydraulic cylinders from movement.
This range of valves are all capable of flow rates of 60 litres/minute and are rated to a pressure of 320 bar. Strictly adhering to ISO4401-03-02-0-94 and DIN 240 340-A6, so they can be fitted with confidence.