Get in touch today to discuss your requirements
Call: (+44) 01452 523352
We have looked at how mini hydraulic power packs are used to affect a lifting and lowering motion in lorry loading platforms, but there are many more lifting applications where a mini hydraulic power pack, either 12v or 24v, is used to create the same type of motion for moving different things.
Passenger lifts, in office blocks and shopping centres, use hydraulics to raise and lower the lift from floor to floor, with sensors in place to stop the lift at the required floor. These sensors know where the lift is and are activated to stop the lift, as requested by a passenger at the desired floor. The sensor tells the hydraulic system to stop at the right place, and an algorithm determines whether the lift goes up or down next, depending on the floors requested and the current position of the lift. The lift moves up and down through the floors and changes direction thanks to a solenoid valve, which allows for motion in both directions. These systems work together seamlessly to move people from floor to floor and most of us take this entirely for granted when we use lifts.
Wheelchair users rely on lifts of this type and dedicated wheelchair lifts in buildings that feature split levels in order to get around. Lifts to lower people in and out of swimming pools and in and out of hospital beds also use hydraulics to affect the raising and lowering action in a controlled manner. In bespoke homes, it is becoming more and more common to find lifts being installed, which is allowing people to remain in their homes into old age, when they are not be able to cope with the stairs. Homes built for people who already have mobility problems may also have a lift installed to help with moving around the home. In America, there are even lifts that allow people to store large and bulky items in their attics; although these work with electrical systems the principle is the same.
Passenger lifts in commercial settings need to be able to handle large loads and their capacity is always clearly stated inside the lift car to prevent overloading. The hydraulic power pack used to drive the system must therefore be capable of moving the maximum permissible load without overheating or causing undue strain on the system. These lifts are usually in large buildings where the lift is installed during the construction process and therefore, the size of the hydraulic system is not such a concern as it is when retrofitting a lift in a private home.
In a private home where a lift is being installed as a retrospective project the size of the hydraulic system is a concern, as the space available is at a premium. The good news is that the lift installed in a private home will only be carrying one person, or perhaps two if a Carer is needed at all times. The load that private lifts must carry is considerably smaller than that of a commercial passenger lift; therefore, a smaller mini power pack can be used. As the electricity supply to domestic homes is AC, it is important that an AC motor is used to drive the system, so that it can run on the main electrical supply in the home. If the system is designed to be integrated into the main electrical supply, then a backup systems should be incorporated, to ensure safety during a power cut – not having a backup system means that a wheelchair bound person could be in danger, if they are not able to leave their homes during a power cut or storm should a medical emergency occur. The backup system may take the form of a battery to power a secondary DC system, or may involve a hand pump over-ride, so that the system can be powered manually, which means no alternative power source is needed.
Whatever your lifting needs, we have a wide range of AC and DC mini hydraulic power packs that will fit the bill across these lifting applications and many more. We can even build a bespoke power pack for new systems where existing components do not fit well. Call us today on 01452 523352 to discuss your needs.
In this article we want to explain the ins and outs of hydraulic powerpacks. A vital piece of equipment that is used with so many machines we see every day.
In a nutshell, hydraulic powerpacks are self contained units that are used instead of a built in power supply for hydraulic machinery. Hydraulic power uses fluid to transmit power from one location to another in order to run a machine. It really is as simple as that.
So what do they look like?
In order to recognise and better understand hydraulic powerpacks, it is a good idea to get to know the key components. Hydraulic powerpacks come in many different shapes and sizes, some are very large and stationary whereas others are much smaller and more compact. In fact, some hydraulic powerpacks are so compact that they can easily be transported in a small van or even an estate car.
The only real way to identify hydraulic powerpacks is through its main components. No matter the size of the unit, all power packs will have the following; a hydraulic reservoir, regulators, a pump, motor, pressure supply lines and relief lines.
What do these components do?
It may be obvious to some but in this post we wanted to explain every component as simply as possible. So here goes.
First up is the hydraulic reservoir which quite simply holds the fluid. Reservoirs will come in different sizes.
Then we have the regulators. Regulators are vital as they control and maintain the amount of pressure that the hydraulic powerpack delivers.
Thirdly we have the pressure supply lines and relief lines. The supply line simply supplies fluid under pressure to the pump and the relief lines relieve pressure between the pump and the valves. The relief lines also control the direction of flow through the system.
Finally we have the pump and a motor. We will begin with the simpler component of the two, the motor. The motor is simply there to power the pump. Easy as that. Now the pump generally performs two actions. Firstly, it operates as a vacuum at the pump inlet and through atmospheric pressure forces fluid from the reservoir into the inlet line and then to the pump. It then delivers the fluid to the pump outlet and pumps it into the hydraulic system. We did warn you that the second part would be slightly more confusing.
So what is the function of hydraulic powerpacks?
Hydraulic powerpacks deliver power through a control valve which in turn runs the machine it is connected to. Hydraulic powerpacks come with a variety of valve connections. This means that you can power a variety of machines by using the appropriate valves.
Hydraulic powerpacks are relied upon by a range of different machines that use hydraulic power to do its work. If a machine is required to carry out heavy or systematic lifting then its likely it would need help from a hydraulic powerpack.
To make it easier for you to understand, we have included a list of trades that regularly rely on our powerpacks. On a building site you will see machines like bulldozers and excavators, which both need hydraulic powerpacks. But, it is not just on building sites that you will find these types of machines. Fishermen and mechanics both need hydraulic powerpacks too. If we did not have them then how would fishermen lift their nets or how would mechanics lift our cars?
When picking a hydraulic powerpack there are a variety of pumps and options to pick from and it is important to pick the right pack to meet your machines needs. It is also important to consider a pack that will help maximise productivity and minimise cost.
Many people will overlook the necessity of hydraulic powerpacks, but they really are vital to ensuring our society runs efficiently.
Do you need to maintain hydraulic powerpacks?
Yes you do and this is hugely important! Hydraulic powerpacks require regular maintenance to ensure they are working properly and safely and to help extend their life. Maintaining hydraulic powerpacks is relatively simple and includes checking the tubing, this can be for any noticeable problems such as dents or cracks. It is also vital to regularly change the hydraulic fluid and look at the reservoir to check for any corrosion or rust.
What hydraulic powerpacks do we provide?
Generally we provide four different types of hydraulic powerpacks. You can pick from a standard powerpack, a mini powerpack, a micro powerpack or a bespoke powerpack.
The standard hydraulic powerpack uses a standard range of modular components and is ideal for the most demanding industrial applications. The mini powerpack is ideal for applications requiring up to 5.5kW. The micro hydraulic powerpacks were originally produced for mobility applications, so are great for when space is limited. Finally, if none of these seem to fit your needs then we offer bespoke hydraulic powerpacks ensuring your application gets the hydraulic powerpack it requires.
Finally, who is the genius behind hydraulic powerpacks?
The man behind hydraulics was Laissez Pascal. A French mathematician, physicist and religious philosopher who lived in the mid seventeenth century. Pascal made observations about fluid and pressure which led to Pascal’s law. Pascal's law states that when there is an increase in pressure at any point in a confined fluid, there is an equal increase at every other point in the container. Hydraulic powerpacks have been designed based on Pascal's law of physics, drawing their power from ratios of area and pressure.
So, interested in our Power Packs? Come on over to the main website and see what we can do for your Hydraulic Power Pack Needs .
Our latest blog looks at renewable energy and how hydraulic power packs are used to power a range of applications in this field.
These applications include wind turbines, commercial biomass boiler systems, solar panels and many more. Below we go into detail about the most commonly used applications and how hydraulic power systems are implemented to power them:
Frequently described as the power of the future, wind power harnesses the forces of nature to create a renewable source of energy and wind turbines have been appearing more often around the countryside in recent years.
Powering large areas of population, it is essential that turbines have a reliable power source. The hydraulic power pack is situated high in the turbine body behind the rotors and its main functions are to control the braking system, the pitch adjustment of the rotors and the rotor locking mechanism.
Wind turbines also have to put up with a range of adverse environmental conditions due to their size and placement with elements such as seawater salt affecting offshore systems and high winds and storms potentially affecting the majority of turbines.
Industry standards suggest that turbines should have a successful operating life of approximately 25 years, so quality and reliability are paramount to a long operational life.
Solar power is one of the most popular types of renewable energy as is it a cost effecting method that can yield substantial savings in the long term.
It is also a simple process, as it harnesses the suns energy to generate heat and electricity and many businesses are jumping on the bandwagon and implementing solar power to make savings on annual running costs.
So, where do hydraulic power packs fit into the equation?
As solar panels need to be able to track the suns position for optimal efficiency, hydraulic power packs are required to power the panel’s movements and provide a precise and reliable power source for this function. The power packs are typically situated in an enclosed control system which helps prevent damage from the elements including flooding and storm damage.
The units are commonly designed to customer bespoke specification and are tailored for easy maintenance and accessibility.
Hydropower is another essential and widely used form of renewable energy which is used widely across the globe.
Hydraulics play a big role in the running of these applications and help control vital control systems including gate operations, brake systems and shut off controls. They are used in both hydroelectric plants and in flood defence barriers where they power hydraulically actuated penstocks, which ensure correct water levels are maintained at all times.
The power pack in penstock applications is situated above ground along with any electrical systems, as to avoid possible flooding and to ensure telemetry is constantly communicated without the risk of malfunctions due to water ingress and other environmental factors.
Biomass Boiler Systems
Widely used in both commercial and industrial applications including homes, schools and industry, biomass boilers are an extremely popular renewable energy source which comes in various sizes and specifications.
The boiler itself contains a ‘Walking floor’ which is basically two metal plates which move forwards and backwards to gradually push waste material into the boiler. Wood chippings and pellets are the common type of products that you see fed through this system. The hydraulic power pack is responsible for powering the Walking Floor and ensuring it operates reliably and effectively.
As recently as a decade ago virtual reality experiences were limited to flight and helicopter simulators, with no chance for the average person to try it out. These simulators still exist and have become more and more technically advanced as graphics improve, but the old and new all have one thing in common – hydraulics.
Hydraulic rams move the simulator, in response to the actions of the person “flying”, which creates a very realistic experience for the trainee pilot. Having this level of virtual reality prepares them for the real world and the feelings of actually piloting an aeroplane or a helicopter. Some simulator manufacturers have trialled electric actuators, but these have their limitations on the amount of weight they can effectively move. Hydraulically operated simulators are more responsive and realistic than those which use electrical actuators.
Virtual reality hardware is now available at a price point where many consumers can afford to buy a virtual reality headset, and experience the amazing visual and acoustic landscapes created by games designers. It is only a matter of time before virtual reality computer games become the norm; and to truly experience the fictional reality created by the game designers a player will need to experience not only realistic sound and images, but movement too. Gaming chairs already exist to make the computer game playing all the more realistic, but these are generally limited to vibrating along with explosions or other effects in the game. The next generation of gaming chair could be a hybrid between the flight simulator and comfortable chair.
The weight of the chair and the average person can be easily moved using micro hydraulic power packs which can affect movement in two directions, allowing the chair to rise and fall with input from the game activity defining what moves, when it moves and how much it moves. Reversible micro power packs could be mounted at each corner of the seat base, allowing for tipping forwards, backwards and side to side, as well as recreating rolling sensations that could mimic the action of the sea. Using these tiny hydraulic power packs means they can be easily installed in the chair without it being bulky and obvious, and they pack quite a punch, capable of operating at pressures of up to 200 bar.
These micro power packs are already used for wheelchair lifts, bath lifts and other mobility products, so the efficiency in moving human weight is already tried and tested. The actual programming of the hydraulic system, to recreate the movement happening in the game accurately, will be a big job – there can only be a few pre-set movements at certain points in the game, as each player will make different choices and may not trigger movement at places where others do. It would be quite a challenge to program one hydraulic motor to act on game input, but when you consider that four must be programmed, and each one will be moving in a different direction, it becomes a very complex task. Flight simulator programmers would be the ideal people to lead the way on designing a new generation of computer gaming chairs, as they have experience of multi-directional movement programming already.
It's quite staggering to think that only 25 years ago computer games came on a floppy disk, with very basic graphics and a theme to match them. Nowadays there is a whole generation of people who never experienced floppy disks, or had to wait for the monitor to warm up before playing virtual tennis, which just makes it all the more staggering to think how far we have come in such a short space of time. How long will it be before the hydraulically operated virtual reality gaming chair becomes the next must-have product?
As designers and manufacturers of the highest quality hydraulic parts we are very proud of our mini hydraulic power packs, which can be driven from 12 or 24-volt direct current (DC) supplies. Our OEM customers rely on our consistency and quality to build functional and reliable equipment, including tail lifts, tipper trucks and trailers. Typically, our 3kW output motor, which relies on a 24v DC supply, is used to raise and lower the ramps of trailers used to transport heavy equipment. The nature of the equipment using the ramp, means that the ramp itself must be sturdy in construction and therefore, quite heavy to lift. The 3kW mini power pack does this with ease, and is fan cooled to guard against overheating.
For more lightweight applications, such as tailgate lifts on commercial passenger vehicles, a smaller output is needed. For these uses a 12v mini hydraulic power pack is used, as the 12v motor can be wired into standard vehicle electrical circuits for tailgate lift functions. The 12v model is available with a 500W or 800W output, so the choice depends on the amount of power that is needed to drive the hydraulic pump in the system.
We manufacture our products to be compatible with all major brands of pumps and valves, so they can be used in any system where a new component is needed, or the system needs to be upgraded to handle a larger capacity. Our valves and other components we manufacture, are also designed to be used in a wide variety of systems, and with a global distribution network we can serve your DC hydraulic motor needs wherever you are.
Our mini hydraulic power packs may be small (around 16 inches long) but they are capable of packing a mighty punch; the model with most capacity is the 3kW, 24v model, but the 12v and 24v models have outputs between 0.5kW and 2kW. This is a wide range of strengths, allowing our customers to use the most efficient and appropriate motor for their needs. This range also means systems can be designed with the lowest possible power consumption across all parts, but with the most efficient hydraulic output of that power. System designers do not have to compromise on power because the ideal output size is not available. We do make bespoke components, so even if we don't have the exact off-the-shelf DC power pack you need, we can still make it happen for you.
Our micro hydraulic power packs are also a great option for when one of our mini power packs are too large for the space available. They are only 89mm square and can be discreetly installed in the moving arm of a security barrier or automatic gate system. The 0.5kW mini motor with 12v DC supply is often used for step lifts and other applications where the load to be moved is not too heavy, so step lifts and passenger lifts on small vans or taxis that will not be taking huge equipment, can be driven by one of these smaller motors. Running on a 12v DC supply means that the tail lift system can be seamlessly integrated into the electrical systems of the vehicle, and operated from the standard dashboard. The driver can raise or lower the lift from the comfort of the driver’s seat and not worry about having to use separate controls for this action.
If you are reading this as an OEM then please do not hesitate to get in touch with us. If we haven't got your ideal component listed on our website, then we will be delighted to create a bespoke product that answers your problems, all manufactured on site in the UK. Call us today on 01452 523352
As you are aware we love hydraulic power, we wouldn’t do what we do if we didn’t. But, today we wanted to write an article on some of our favourite machines that are powered by hydraulic powerpacks. We have told you before that the world is a better place because of hydraulic powerpacks, and today we are going to prove it.
Firstly we have chosen to look at how hydraulic powerpacks help the everyday mechanic.
In the UK, there are as many as 36 million cars registered on the roads. At many points during a cars life, they will need to visit a garage. Hydraulic lifts are vital for mechanics to see and get under your car and our hydraulic powerpacks can easily connect to your mechanics lift, providing all the power it needs to lift up your car. This in turn not only makes a mechanics job much easier, but it also means your car has been thoroughly checked over. Thanks to hydraulic power your car will spend a minimal amount of time out of action.
Hydraulic power packs, such as the ones supplied by Hydraproducts, are a vital part of the construction industry. With a huge push on new home building across the country, it is a daily occurrence to see heavy plant equipment moving earth and preparing groundworks for construction. All of these ‘earth moving’ machines use hydraulic power to effect motion in the moving parts, with hydraulic rams serving as the muscles of the machine to raise and lower a digging arm, or to move large pipes into place for infrastructure development.
Hydraulic power packs allow the machinery to generate more power in the moving parts than if just the engine power alone was directly driving the hydraulics, so they mean a smaller excavator can move as much as a larger one without the need for that extra space. On new build sites, there is a lot of space to start with, so there is no issue with the largest machinery manoeuvring around the site. When houses start to go up and roads are installed, there is less machinery space and it makes sense to use a smaller version of a particular machine that has the same power capabilities.
A hydraulic power pack can also reduce the amount of fuel used to drive the hydraulic components, as most heavy earth moving equipment has a range of modes that can be selected to give the right amount of power while remaining economical. Digging out large amounts of earth will use a lot of power, and this can be increased above the machinery capacity by using a hydraulic power pack. Fine grading of embankments, or excavating over mains power, gas or sewage pipes requires a fine degree of control that is best achieved at a lower power. Hydraulic power packs can help to control this when used in combination with the modes available on the machinery itself. The effect is a reduction in fuel used to generate the hydraulic power and a considerable cost saving over the lifespan of a project.
Because the earth moving equipment uses hydraulics there is no need to employ a separate engineer to maintain and repair the hydraulic power packs as they use the same technology, so there is no extra cost in maintenance terms, just the cost of the power pack. When considering this investment, it is important to understand that the better control leads to improved productivity and workforce morale, as well as a lower outlay on fuel.
Hydraulic power packs are not confined to use in the preparatory stages of a large building project, however, they are also used to work cranes, that lift roof struts into place; in forklifts, that move materials around the site and even in concrete pumping machines, that are used to lay floors and external hard standing surfaces. Hydraproducts are very happy to work with equipment manufacturers to find or design the perfect hydraulic power pack for the construction industry.
Hydraulic Power Pack
Connect with us
Connect with us on social media or eBay